home CGW Finishing Process

1- Follow the application steps normally as per our Skin Tutorial.

 

2- After applying let it dry 1 day if you have used detergent.

 

4 - With the compressor or spray, apply smoky coats every 15 minutes. (about 3-4 times)

 

5 - Wait at least 30 minutes to sand.

 

6 - With a 400 grit sandpaper, sand the edges where the adhesive mismatch is evident until it is aligned and eliminated.

 

Apply to the end of the sticker the Burst

 

7 - The Process from now on, is the same as a conventional painting.

 

8 - Avoid overcharging the spray / compressor to avoid wrinkling the skin.

 

9 - We recommend at least 2 full body varnish applications, sanding with 600/1200/2000 sandpaper and polishing.

Skin accepts any type of varnish (PU / Polyester / Nitro) CGW Videos of Finished Guitars
home